|
The GF-230 is a function generator covering the
frequency range from 0.1 Hz to 1 MHz in seven decades. It allows
to generate sinusoidal, square and triangular waves with
continuous control of the output level, fixed 20 attenuator and
the possibility to superimpose the signal at a continuous level
through the DC Offset control. |
The GF-232 covers from 0.2 Hz to 2 MHz and it is equipped with a
50Ω output. Also included is a signal symmetry control, allowing
to obtain saw-tooth signal, digital frequency indication, a
power amplifier up to 4 MHz with a 50Ω output impedance, a
variable-level comparator and frequency meter up to 10 MHz (5
digits). |
The GF-855 is a functional Function generator that applies
Frequency feedback control system technique and can generate
high frequency accuracy with high resolution. Its main signal
source can generate waveforms including sine wave, square wave,
triangle wave, and ramp wave. |
The GF-857 is a functional signal generator that applies DDS
(Direct Digital Synthesis) technique and can generate
frequencies at a resolution of 20 MHz, with a high frequency
accuracy of 10 ppm. |
The GF-941 combines two generators in a single
device which allows modulated signals to be obtained in AM or
FM, frequency sweeps to be carried out and bursts to be sent
from the main generator in the “burst” function. |
